Cambio HGU Movistar por ONT Ufiber Loco

cadroguett

Miembro Regular
Se incorporó
10 Octubre 2008
Mensajes
46
Hola a todos!
la pregunta es bien simple, tengo contratado movistar fibra con el HGU Askey RFT3505VW pedi que me instalaran esta debido a que la informacion para ponerla en modo bridge esta disponible y la verdad es bastante facil de hacer. Ahora el tema es que me gustaria poder sacar del todo el equipo de movistar.
tengo un Edgerouter 4 con lo cuak podria poner una ont sfp pero estuve viendo en otros foros principalmente españoles, y a verdad los modulos son escasos y siempre hay algun problema para hacerlos funcionar.
Viendo unos videos en youtube vi a un español que mostraba como sacar el ont router de movistar y usaba una ufiber nano g que es practicamente lo mismo que el ufiber loco menos la pantalla.
Ahora el tema es si estos equipos de ubiquiti son compatibles con las OLT que movistar usa aqui en chile, y cuales son los requisitos para la autentificacion.
Existe algun otro aparte de la clave IdONT, o Gpon Password y la autentificacion pppoe?
Alguno de ustedes ha realizado este tipo de cambio en movistar con esta HUG .

De Antemano gracias por los comentarios
 

Gradius

Systems Integrator
Se incorporó
29 Marzo 2014
Mensajes
251
Por lo que vi flash set LOID es lo mismo que el idONT, a igual que el GPON_PLOAM_PASSWD.

La duda ahora es el LOID_PASSWD al parecer... es nada (vacio) ?
 
Upvote 0

Gradius

Systems Integrator
Se incorporó
29 Marzo 2014
Mensajes
251
Todas las claves del RTF8225VW

Support_wan
HgUTe2eF7n2C4ax

Support
PKG4mPCr

user
PKG4mPCr

Installation
HguTe2eF7n2C4

telefonica
telefonica
 
Upvote 0

Gradius

Systems Integrator
Se incorporó
29 Marzo 2014
Mensajes
251
Sobre el LOCO, el ultimo FW (v4.4.6.2671) trae:

Profile 1: UBNT
Profile 2: Huawei
Profile 3: FiberHome
Profile 4: ZTE
Profile 5: Unknown Mode (modo desconocido)
Profile 6: Enforce by OLT (según el OLT)

Alguien puede confirmar eso?

El loco usa el procesador: BCM96848

Vi un usuario que tenía la v4.5.3.
 
Última modificación:
Upvote 0

Gradius

Systems Integrator
Se incorporó
29 Marzo 2014
Mensajes
251
Ya tengo la ultima version 4.9.3 (4.9.3.6526.250526.1220), desde la 4.4.6, lo que cambió:

4.9.3:

Overview​

UISP Fiber 4.9.3 firmware provides bug fixes and stability improvements.

Bugfixes​

* UF-OLT, UF-OLT4: Fixed rare issue in internal switch upgrade
* UF-WiFi6, UISP-Fiber-XG, UISP-Fiber-XGS: Fixed memory leak when client isolation was disabled.


4.9.1:

Improvements​

  • Added support for WaveFiber ONU

Bugfixes​

  • Fixed IPv6 memory leak
  • Fixed PON Drift handling leading to unexpected disconnects

4.9.0:

Improvements​

  • Enforcement of strong passwords
  • SSH is disabled in a factory default configuration
  • Static DHCP leases can be configured for ONUs in Router Mode
  • DHCP renew called after cable connected to MGMT port
  • Upgraded Debian to bookworm

Bugfixes​

  • Improved Logging
  • udhcpd replaced with dnsmasq
  • Fixed Opt82 relay on/off toggle
  • UF-WIFI6 start-up stability
  • WebUI: Fixed special characters in notes and comments
  • WebUI: Fixed invalid config causing ONU configuration not to show
  • DNS: ONU receiving DNS on WAN now updates properly when switching WAN Method
  • DNS: UF-Nanog: Now uses multiple DNS servers
  • DNS: Added DNS proxy toggle
  • Security: Wi-Fi Auth Flooding Vulnerabilities (CVE-2021-41788)

4.8.0:

Improvements​

  • Firmware upgrade process improvements.
  • Insert DHCP Option 82 into ONU WAN Requests.
  • Removed ONU MAC address listed under connected devices. (Now only connected devices show without showing the ONU's MAC in the list.)
  • Introduced Mac Limiting Feature:
  • Static MAC Address Limiting with Allowed List or Deny List
  • Dynamic MAC Address Limiting: When “Limit learned addresses” is checked, an ONU in bridge mode will limit the number of connected devices based on the value set in "Count of addresses".

Bugfixes​

  • Fixed ONU LAN port traffic counters.
  • Fixed a rare case of unexpected ONU reboot when certain non-offloaded traffic is passing.
  • Fixed a rare case of ONU provisioning failure.
  • Fixed UF-WIFI DHCP checksum error when in bridge using DHCP option 82.
  • Fixed UF-WIFI debug logging.
  • Fixed UF-WIFI Stability.
  • Fixed ONU reboot reason logging.
  • Fixed UF-WIFI6 Auto Channel Selection.
  • Fixed UF-NANO and UF-LOCO Router mode port forward failure after reboot.

4.7.0:

Improvements​

  • Increased debug data and reporting.
  • Improved XG/XGS distance calculation.
  • Updated Dropbear SSH version.
  • IPv6 Support for UF-LOCO and UF-NanoG when in router mode.
  • ONUs now block IPv6 RA when in bridge mode.

Bugfixes​

  • Fixed ONU factory reset from OLT where hostname did not reset.
  • Fixed UF-Nano IPv6 bug causing crashes.
  • Fixed ONU Router Mode where DHCP Server gateway field trimmed long gateway addresses.
  • Fixed Ethernet link speed reporting error.
  • Fixed rare cases of duplicate DHCP addresses assigned to ONUs when many ONUs re-connect at the same time.

Known issues​

  • [UF-WiFi] L2 loop between WiFi and LAN port can cause a device reboot.

UFiber OLT 4.7.0-rc1
ONU reboot reason logged
ONU support file GET more retransmits
Remove UBNT wording
UDAPI: systemId added to ONU settings
WebUI: ONU router mode - IPv6 support

UFiber OLT 4.6.0
ONU experience: penalize signal out of range, correct range per ONU model
ONU: PPPoE: mschap-v2 support
Generate random password in default ONU configuration
WebUI: ONU cfg: Port forwarding 32 rules should be allowed
WebUI: Rename UFiber to UISP Fiber
UDAPI: Include SFP serial number in UDAPI

UFiber OLT 4.5.3
GPON SDK upgrade
added watchdog for GPON and switch chips
switch uboot upgrade

UFiber OLT 4.4.9
OLT: fixed performance issue in large deployments (>800 ONUs)
OLT: OpenSSL update
UF-Nanog/Loco: Fixed hw watchdog, improved webserver resources handling, improved logging.
UF-Instant: Fixed broadcast/multicast traffic in tagged networks, multicast loop when client isolation is disabled, multicast join to multiple groups
UF-WiFi: Fixed rare PPPoE connectivity failure after boot, improved logging, add wifi debug information to support file.
UF-WiFi6: Improved logging, add wifi debug information to support file.

UFiber OLT 4.4.8
UF-WiFi: WiFi driver stability fix
OLT: OMCI RTT logging

UFiber OLT 4.4.7
OLT WebUI: DNS server and port forwarding rules in ONU configuration were not saved
UF-WiFi6: Fixed memory leak in bridge mode when receiving multicast IPv6 packets

UFiber OLT 4.4.6
UF-Nanog/Loco/Instant/WiFi/WiFi6: Add hw revision to support file
UF-WiFi: Drop invalid packets which may cause a crash
UF-WiFi/WiFi6: Webserver and ssh server were sometimes not started during boot
UF-WiFi6: Fixed hw watchdog
UF-WiFi6: Memory usage improvements
UF-WiFi6: Stability improvements
 
Upvote 0

Gradius

Systems Integrator
Se incorporó
29 Marzo 2014
Mensajes
251
BETA

Overview​

UISP Fiber version 4.10-rc2 firmware provides bug fixes and stability improvements.

Improvements​

* Provision ONU that failed verification
* ONU software update process refactored
* Brazil/ANATEL ONU password requirements
* WaveFiber-ONU: Router mode support
* OLT-XGS: Link-local IPv6 address enabled in factory default configuration
* OLT-XGS: align SNMP ifTable switch interfaces with UDAPI
* OLT-XGS: in-band management loop prevented using ebtables

Bugfixes​

* OLT-XGS: Enabled Remote system log changed log level
* OLT-XGS: LLDP neighbors from SFP ports reported to UISP
* UF-WiFi6, UISP-Fiber-XG, UISP-Fiber-XGS: Fixed memory leak when client isolation was disabled.

Known issues​

* WaveFiber-ONU: known issues: missing IPv6 over PPPoE
 
Upvote 0

Gradius

Systems Integrator
Se incorporó
29 Marzo 2014
Mensajes
251
Por fin logré hacer partir el ODI nuevamente, me estaba matando la cabeza, sospechaba que era ALCL, pero no los detalles de la config.

Curiosamente en el modem me tiraba VID de 2, con priority 4.

Código:
# omcicli mib get 84
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x1102
FilterTbl[0]: PRI 0,CFI 0, VID 757
FwdOp:  0x10
NumOfEntries: 1
=================================

Código:
# omcicli mib get 131
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
OltG
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityId: 0x00
OltVendorId: 0x414c434c (Alcatel/Nokia [ALCL])
EquipId:
Version:
ToDInfo:
        Sequence number of GEM superframe: 0x0
        Timestamp: secs 0, nanosecs 0
=================================

Dejaré un resumen acá como referencia:

Código:
LOID      : es el Line ONU Identifier
LOID pass : dejar en blanco (confirmé que no es necesario)
PLOAM pass: 7 digitos (ascii) del LOID

OMCI Vendor ID    : MSTC
OMCI software v1  : CL_g1.17_RTF_T
OMCI software v2  : CL_g1.17_RTF_T
OMCC version      : 0xA0 (160)
Traffic Managament: 1
CWMP Product Class: SFU
HW version        : R1

Dupliqué la MAC de WAN del modem original (RTF8225VW), esa parte no sé si es necesaria.

VLAN ID : 757
Priority: 0



Mi plan actual es 600/600 pagando $13 lucas.
 

Archivo adjunto

  • 2.jpg
    2.jpg
    205,9 KB · Visitas: 54
  • 4.jpg
    4.jpg
    302 KB · Visitas: 54
Última modificación:
Upvote 0

Gradius

Systems Integrator
Se incorporó
29 Marzo 2014
Mensajes
251
Después de por fin compilar el driver para Proxmox 9.0.3, pude volver a tener mi ODI SFP+ conectado directamente a la tarjeta.

Nostalgia.

Por la LAN:
[SUM] 0.00-10.01 sec 11.1 GBytes 9.49 Gbits/sec sender
[SUM] 0.00-10.01 sec 11.0 GBytes 9.47 Gbits/sec receiver
 

Archivo adjunto

  • IMG_20250810_034912.jpg
    IMG_20250810_034912.jpg
    290,9 KB · Visitas: 33
Upvote 0

Gradius

Systems Integrator
Se incorporó
29 Marzo 2014
Mensajes
251
Con eso está comprovado que Vomistar no vende 2Gbps por qué no quiere.

Mundo real (GPON):

Bajada: ~2,2Gbps
Subida: ~1,1Gbps
 
Upvote 0
Subir